Categories

Infusion/ blood warmer ANIMEC AM-2S

General Description

The AM-2S is an electrically powered, dry-heat warmer which supplies external heat to the plastic tubing incorporated in intravenous administration sets. The IV Tube set is placed in the ‘S' shaped channel in the aluminum heating plate. The device is available in 4mmØ (diameter 3.1 ~ 4.0) and 5mmØ (diameter 4.1 ~ 5.0) models for all tubing sizes.

Benefits:

  1. Automatic regulation
    The temperature of the warming plate adjusts according to the desired temperature of the effluent.
  2. No disposables
    Special warming bags or coils are not required.
  3. Less heat loss after warming
    Small size neccessitates minimal tubing between the patient and the unit preventing cooling of the infused fluid.
  4. Quick set-up
    The tube is inserted directly into the warmer; no priming or disposable preparation is required.
  5. Rapid warm-up
    Ready to use in 2 ~ 3 minutes
  6. Safe performance
    Protection from overheating, electric shock and contamination.
  7. High durability
    Simple construction and shock resistant casing.

 

Infusion/ blood warmer

ANIMEC AM-4

General Description

The AM-4 is an electrically powered dry heat warmer that supplies external heat to the L-fusion disposable warming bag. The L-fusion set is placed between the two aluminum heating plates in the AM-4

Benefits:

  1. Automatic Temperature Control
    Heating is controlled by one effluent temperature sensor and two heating plate temperature sensors.
  2. Temperature Display
    Easy to read by LED display shows the temperature of the fluid. Accurate fluid temperature increments of 0.1 ºC degrees.
  3. Alarm
    An audible buzzer and visual alarm are activated at a fluid temperature of
    41.5 ºC (AM-412), 39 ºC (AM-413).
    The alarm buzzer volume is adjustable
  4. Spare fuse
    A spare fuse is included inside the AM-4 unit.
  5. Quick set-up
    The L-fusion set is placed directly between the heating plates.
  6. Rapid warm-up
    Ready to use in 2~3 minutes
  7. Safe performance
    Protection from over-heating, electric shock and contamination.
    Protection from air bubbles is provided via the air chamber in the L-fusion disposable set.
  8. High durability
    Simple construction and shock resistant.

 

Disposable BHP

 

Enteral Nutrition Warmer LIFORT LT-1

General Description


The LT-1 is an electrically powered, dry warmer which supplies external heat to the plastic tubing incorporated in enteral nutrition administration sets. The enteral nutrition administration set is placed in the ‘S' shaped channel in the aluminum heating plates. The device is available in 5mmØ (size diameter 4.1 ~ 5.0) model for tubing size.

Benefits:

  1. Warming assists powdered nutrition mixtures to dissolve completely
  2. Automatic regulation
    The temperature of the warming plate adjusts according to the desired temperature of the effluent.
  3. No disposables
    No special warming bags or coils are required.
  4. Less heat loss after warming
    Small size necessitates minimal tubing between the patient and the unit preventing cooling of the infused fluid.
  5. Quick set-up
    The tube is inserted directly into the warmer; no priming or disposable preparation is required
  6. Rapid warm-up
    Ready to use in 2 ~ 3 minutes
  7. Safe performance
    Protection from overheating, electric shock and contamination
  8. High durability
    Simple construction and shock resistant casing.

Permintaan harga klik di sini